CVBS camera
91737146933971. Product introduction:
A CVBS camera motherboard. Using Korean Pysel sensor PC1058D, it has high resolution and low illumination. The camera effect is clear.
2. Application scenarios:
It is suitable for vehicles, security monitoring, video doorbells, drones and other fields.
3. Product overview:
A CVBS camera motherboard, the camera sensor used is South Korea's Pysel PC1058D. The motherboard PCB size is only 16x16mm, which is very suitable for miniaturized products.
Fourth, the specific parameters of the product:
1. Sensor target size: 1/3 inch
2. Input voltage: 3.0-3.3V/DC.
3. Current≤120mA/3.0V/DC
4. Video output: CVBS, 1Vp_p±10%, 75Ω
5. Camera resolution: 960*576.
6. Ruler line: support.
7. Horizontal mirror image/positive image: optional
8. Standard PAL/NTSC: optional
9. Working temperature: -30.0℃～+80℃.
Five, product use tutorial:
1. FLASH needs to burn the program and then mount it.
2. The front of the motherboard:
CVBS camera hardware project Figure 1
3. The reverse side of the motherboard:
CVBS camera hardware project Figure 2
4. Solder 3 external connecting wires, and the solder joints are "video output", "GND" and "3.3V".
5. R19, R17, and R15 are function optional paste resistors (0R/0402), which can be selected according to actual needs.
6. Install the lens holder and lens, connect the video signal cable to the CVBS monitor, power on, adjust the focus, and then it can be used normally.
6. Remarks:
1. This product needs to be used after burning the program code. The code and burning tool method are explained in the appendix.
2. The RC and crystal oscillator FLASH can be purchased directly in Jiali Chuang Mall or by yourself.
3. The lens mount, lens and sensor are not included in the BOM, so they need to be prepared by themselves. There is a reference purchase link in the attachment.
Accessories description:
1) Lens mount specifications: M12, inner frame 10x10mm, outer frame: 11.5x11.5mm.
2) Lens specifications: wide-angle lens (lens can be selected according to actual needs).